Ian & Pete stretched another two pistons' worth of stretch bolts, before having to abandon this until a spanner can be bent, as the power unit internal structural webbing is now getting in the way of using the spanner properly. They then helped Dave loosen the bolts on the spare bogies to allow the traction motors to be removed sometime this year for overhaul. I test fitted the other two small boards that go behind the divert contactors, and found they fit easily. These two boards house the ETH overvolt relay HOVR & it's associated resistor Z24, the ETH voltage sensing resistor Z23, the ETH earth parallel resistor Z69, the ETH earth fault relay HEFR, & it's associated resistor Z62, and the ETH detector relay HDR. I bolted the left-hand board in place and wired in HOVR, Z23, Z24 & Z69.