RRRG Officer Mark Burrows recently visited our electrical contractors to view progress on a number of electrical machines we are having overhauled for use in 50029 and 50030.  Here are some pictures of the work we have in progress on electrical machinery.

We have amassed a number of "duplicate" electrical machines over the years, partly with the intention of locating better condition items than are already inside 50029 and 50030 (the major electrical machines are intact in both locomotives but in poor condition after years of disuse) and so reduce the cost of overhauling them as well as the cost of extracting the machines from inside the locomotives in the first place.  For example, in addition to the exhausters inside 50029 and 50030, we have two others currently with our electrical contractor.  One was obtained from a scrap Class 37 at Booths and the other was purchased in almost fully overhauled condition from Unipart Rail some time ago. The latter had been in store for some considerable time and had deteriorated slightly as a result.  Both of these are now finished with the ex-Booths machine having had an oil leak repaired and the ex-Unipart motor blower having received a light overhaul to bring it up to the "as new" standard we are aiming for with our restoration project.

 

b2ap3_thumbnail_IMG_7929-two-overhauled-exhausters-20130514rem.jpg b2ap3_thumbnail_IMG_7930-motor-blower-bowers-in-process-of-overhaul-20130514rem.jpg
Two overhauled exhausters seen in April 2013. A traction motor blower which is at an almost complete stage of overhaul, waiting only for a new bearing before it is complete.

 

Each of the electrical machines we send for overhaul and refurbishment is fitted with new brush gear as illustrated in this close-up of the fan motor in the newly-overhauled traction motor blower, and the opportunity is also taken to refurbish the "snail" casing for this machine.

 

b2ap3_thumbnail_IMG_7932-close-up-blower-brush-gear-20130514rem.jpg b2ap3_thumbnail_IMG_7934-snail-and-fan-20130514rem.jpg
Close up of the fully overhauled brush gear in our overhauled traction motor blower. The "snail" fan casing from the motor blower has received an overhaul and respray too.

 

A full set of pictures from the visit can be found in the RRRG image gallery.