Dave Rolfe, Jay Hirst, Mark Burrows and I were on site today. Mark barred round the power unit and oiled all four turbos again. Dave and I hunted out the big air pipes for the exhauster under the brake frame, finding most of what we need. The rest we either haven't found yet or is missing. Dave then set about cleaning the sections we found. Jay and I re-assembled the lower part of the brake frame conduits that I had cleaned and primed, and terminated the severed wires in the connection box. Getting the original severed wires through the reinforced hose and into the connection box was no easy task. (Header image by Andy Rowlands, other photos by Jay Hirst).